◆Technical characteristics:
=1, high throughput, maximum output of up to 300 tons per hour;
=2, with continuous filtration, will not block the magic of the characteristics of;
=3, filter tube precision 70~600 mesh (200um~25um) optional, filter tube tension automatic adjustment;
=4, by adjusting the tilt angle of the filter tube to adjust and optimize the filter flow and filter cake concentration in order to achieve the best balance;
=5, with automatic flushing device. Spray around the ring, all clean no dead ends, according to the situation of the material, can be set once a day or several times;
=6, high feed, no need to pump, saving energy;
=7, relative to the centrifuge, low cost operation and daily maintenance.
◆Application range;
=1, fruit and vegetable juice pre filter;
=2, food processing plant wastewater filter;
=3, paper mills, textile mills and other industries to recycle, in order to prevent clogging pipes and evaporator scaling and affect its heat transfer efficiency;
=4, for the solid-liquid separation of liquid state of suspension, on our front squeeze separator as a pre dehydration to increase production;
=5, the sugar industry of bagasse filter cleaning.
=6, and my company supporting the use of squeeze separator. For dilute materials, can be placed in front of the press to play the role of pre dewatering; can also be placed behind the press, with a certain precision of the filter, the squeezing out of the liquid to play a further fine filtering.
◆Working principle:
High level liquid into the filter in the polymer filter cylinder, the filtered supernatant collected after the filtering cylinder of stainless steel cavity from the pipeline discharge. Cartridge special propeller to a certain speed rotation, and will continue to automatic compact polymer cartridge interaction of liquid formation impulse vibration type, resulting in siphon effect, the liquid through the filter cartridge to filter, more important is effective to prevent the filter cylinder plug, also adhesion in the propeller of the fiber solids to vent from the other end of the cartridge in the promotion of the propeller blades.
Model |
Capacity
(t/h) |
Filter cartridge
diameter
(mm) |
Motor
hp
(kw) |
Outline dimension
L× W× H
(mm) |
Weight
(t) |
ZTZG-500 |
2~30 |
0.5 |
0.37 |
1300×650×1100 |
400 |
ZTZG-800 |
10~50 |
1.3 |
1.5 |
1900×850×1300 |
730 |
ZTZG-1200 |
25~100 |
2.8 |
3 |
2700×1250×1500 |
1100 |
◆For a large number of applications video, please click on the following link: